Allied Telesis Switch 8100S User Manual

Switches  
product information  
8100S Series Fiber Switches  
LAYER 2–4 FAST ETHERNET STACKABLE SWITCHES  
The 8100S Series fiber switches offers 100FX multimode fiber  
ports managed switches with high performance Layer 2-4  
switching designed for the edge of network.  
The 8100S Series consists of 16 100FX  
(SC and LC) MMF ports and 24 100FX  
(LC) MMF ports switch models. The  
16-port models come with 16 100FX  
plus 8 10/100TX ports. All 8100S Series  
switches offer two Gigabit combo  
10/100/1000T-SFP uplink ports plus  
two dedicated stacking connectors  
that deliver a total of 10Gbps stack  
bandwidth. The stackable Ethernet  
series offers fiber connectivity suitable  
for a network that requires high security  
and long distance connectivity.  
Ease of Management  
Designed for rapid deployment with  
the minimum of configuration time, the  
8100S Series offers features such as  
Voice VLAN, LLDP-MED, Enhanced  
Stacking and Web management GUI  
that facilitates simple and effective  
approach to network management.  
Voice VLAN segregates VoIP traffic  
from regular Ethernet traffic and  
applies to it a higher QoS. It takes the  
complexity out of VoIP deployments,  
ensures high voice quality and protects  
time sensitive voice traffic from being  
flooded by other data. LLDP-MED lets  
the user auto-configure end stations to  
send preconditioned traffic that adheres  
to Voice VLAN configured network  
policies.  
Key Features  
Secure  
» The 8100S Series fiber switches are designed to  
offer 100FX multi-mode connectivity for a higher  
level of security not found in copper based Ethernet  
systems. This combined with advanced access  
security features protect the critical edge of the  
network.  
Able to go the distance  
» Fiber connectivity is ideal for networks that demand  
high bandwidth over long distances. The 8100S  
Series fiber modules support Gigabit and 100Mbps  
up to a distance of 2 kilometers over multi-mode  
fiber, and up to 80 kilometers over single-mode fiber.  
Fiber is able to transport data over long distances  
without the type of degradation that you see with  
copper, allowing high scalable and flexible network  
design for big business campuses, educational  
campus and large retails stores.  
Redundant Power Options  
All variants of the 8100S fiber switch  
family feature two internal power  
supplies as standard, allowing the  
switches to be powered from two  
separate building feeds making the  
8100S Series less susceptible to building  
power failures and ensuring continuous  
switch operation.  
Stable in harsh environment  
» Fibers complete immunity to electrical interference  
makes it resistant to cross talk between signals  
among different cables and environmental noise,  
such as radio waves and electric signals. This makes  
the 8100S Series ideal for high voltage environments  
and in places with high EMI (Electromagnetic  
Interference), such as alongside utility lines, conveyor  
belts, power lines, and railroad tracks.  
Enhanced Stacking with 8100S Series  
enables the user to make software  
upgrades for multiple switches with  
a single command, plus update all  
configurations in a single management  
session.  
Stacking  
The physical stacking capability  
integrated into this platform is designed  
to offer simplified management for  
higher port density applications. Up to  
three stackable switches of the 8100S  
copper and fiber series can be mixed  
and stacked together to a maximum of  
78 ports.  
The industry standard CLI of AlliedWare  
Plus™ combined with the simple and  
intuitive Web management GUI reduces  
the training needs for those who require  
granularity of control, by providing a  
familiar interface for advanced users.  
NOT AVAILABLE IN THE UNITED STATES AND CANADA  
alliedtelesis.com  
 
8100S Series Fiber Switches | Layer 2–4 Fast Ethernet Stackable Switches  
Servers  
SwitchBlade x908  
Layer 3 Stackable Switch  
LACP  
8100S Series  
Hardware Stacking  
Expandable to  
78 Ports  
Desktop PCs  
HDMI Stacking Interface  
(8100S/16F8-SC)  
2711FX  
MC102XL  
Thin client  
NOT AVAILABLE IN THE UNITED STATES AND CANADA  
alliedtelesis.com  
 
8100S Series Fiber Switches | Layer 2–4 Fast Ethernet Stackable Switches  
MIB Support  
» DHCP snooping  
» DHCP option 82  
» RFC 3046 DHCP relay  
» RFC 951 BootP  
Specifications  
» RFC 1213 MIB-II  
System Capacity  
» RFC 1215 TRAP MIB  
» 128MB RAM  
» RFC 1493 Bridge MIB  
» 16MB flash memory  
» 16K MAC addresses  
» 266MHz CPU  
» RFC 2863 Interfaces group MIB  
» RFC 1643 Ethernet-like MIB  
» RFC 2618 RMON MIB  
IP Multicast  
» RFC 1112 IGMPv1 snooping  
» RFC 2236 IGMPv2 snooping  
» IGMPv2 snooping querier  
» Multicast groups – 255  
» RFC 2674 IEEE 802.1Q MIB  
» RFC 2096 IP forwarding table MIB  
» Allied Telesis managed switch MIB  
Maximum Bandwidth  
» Non-blocking for all packet sizes  
Wirespeed Switching (Layer 2/3) on all  
Ethernet Ports  
IPv6  
Management  
» IPv6 host  
» 14,880pps for 10Mbps Ethernet  
» 148,800pps for 100Mbps Ethernet  
» 1,488,000pps for 1000Mbps Ethernet  
» RFC 854 Telnet server  
» IPv6 ACL  
» Console management port  
» AlliedWare Plus CLI  
» Web GUI  
» ICMPv6  
» Dual-stack IPv4/IPv6 management  
» IPv6 applications: WEB/SSL, Telnet server/SSH,  
Environmental Specifications  
» Enhanced Stacking  
» RFC 1866 HTML  
» RFC 2068 HTTP  
» RFC 2616 HTTPS  
» RFC 1350 TFTP  
» zModem  
» Operating temperature: 0ºC to 40ºC  
IP Routing  
» Storage temperature: -25ºC to 70ºC  
» Static IPv4 routing – 4K  
» Operating humidity: 5% to 90% non-condensing  
» Storage humidity: 5% to 90% non-condensing  
» Max operating altitude: 3,048 m (10,000 ft)  
» RIPv1, v2  
» Proxy ARP  
Security / IEEE 802.1x  
Port Configuration  
» RFC 1305 SNTP  
» RFC 1155 MIB  
» TACACS+  
» Auto-negotiation, duplex, MDI/MDI-X, IEEE 802.3x  
flow control/back pressure  
» RFC 2865 RADIUS client  
» RFC 1157 SNMPv1  
» RFC 1901 SNMPv2c  
» RFC 3411 SNMPv3  
» RFC 2866 RADIUS accounting  
» Head of Line (HoL) blocking prevention  
» Broadcast storm control  
» Link flap protection  
» IEEE 802.1x port-based Network Access Control  
(NAC)  
» RFC 1757 RMON 4 groups: Stats, History, Alarms  
and Events  
» Supplicant  
» Group link control  
» Authenticator  
» Port mirroring  
» RFC 3164 Syslog protocol (client)  
» Event log  
» IEEE 802.1x multiple supplicant mode  
» Piggy-back mode  
Ethernet Specifications  
» RFC 3176 sFlow  
» Auto config  
» RFC 894 Ethernet II encapsulation  
» Per port MAC address limiting  
» Per port MAC address filtering  
» MAC address security/lockdown  
» RFC 1321 MD-5  
» IEEE 802.1D MAC bridges  
» IEEE 802.1Q Virtual LANs  
VLAN  
» IEEE 802.2 Logical link control  
» IEEE 802.3ac VLAN TAG  
» 4096 VLANs (IEEE 802.1Q)  
» Port-based VLANs  
» EAP, EAP-TLS, LEAP, PEAP, TTLS  
» Dynamic VLANs  
» IEEE 802.1ax-2008 (LACP) link aggregation  
» IEEE 802.3u 100TX  
» MAC-based VLANs – 256  
» IP subnet-based VLANs – 256  
» Port-based Private VLANs  
» GARP VLAN Registration Protocol (GVRP)  
» Guest VLANs  
» IEEE 802.3x Full-duplex operation  
» IEEE 802.3z Gigabit Ethernet  
» Jumbo frames (9198 bytes)  
» Secure VLANs  
» Layer 2/3/4/ Access Control Lists (ACLs)  
» SSLv3 for Web management  
» SSL  
Link Aggregation  
Quality of Service (QoS)  
» IEEE 802.3ad LACP - eight groups  
» SSH  
» Eight egress queues per port  
» Static link aggregation - 24 groups  
» SSH session time out  
» Microsoft NAP compliant  
» Symantec NAC support  
» Egress rate limiting  
» Voice VLAN  
Link Discovery  
» IEEE 802.1ab Link Layer Discovery Protocol (LLDP)  
» Automatic QoS  
» Link Layer Discovery Protocol-Media Endpoint  
(LLDP-MED)  
» IEEE 802.1p Class of Service with strict and weighted  
round robin scheduling  
Stacking Features  
» 10Gbps stacking bandwidth via dedicated HDMI  
stacking ports  
» RFC 2474 DSCP for IP-based QoS  
» RFC 2475 Differentiated services architecture  
» Layer 2, 3 and 4 criteria  
General Protocols  
» RFC 768 UDP  
» Hardware stack up to three units (78 ports) using  
HDMI stacking ports or stack up to 24 units using  
Enhanced Stacking  
» RFC 791 IP  
» RFC 792 ICMP  
Spanning-Tree Protocol  
» Single system appearance  
» Single IP management  
» RFC 793 TCP  
» IEEE 802.1D Spanning-Tree Protocol  
» RFC 826 ARP  
» IEEE 802.1D-2004 Rapid Spanning-Tree Protocol  
» Backup master  
» RFC 950 Subnetting, ICMP  
» RFC 1027 Proxy ARP  
» RFC 1035 DNS  
» IEEE 802.1q-2005 Multiple Spanning-Tree Protocol  
(15 instances)  
» Link aggregation / trunking across hardwire stack  
» Port mirroring across stack  
» VLAN across stack  
» BPDU guard  
» Loop guard  
» Root guard  
» RFC 1122 Internet host requirements  
» DHCP client  
» Maximum HDMI stacking cable length 1m  
NOT AVAILABLE IN THE UNITED STATES AND CANADA  
alliedtelesis.com  
 
8100S Series Fiber Switches | Layer 2–4 Fast Ethernet Stackable Switches  
Compliance Standards  
LATENCY  
PRODUCT  
SWITCHING CAPACITY  
FORWARDING RATE  
» IEEE 802.3 – 10T  
10Mb  
100MB  
» IEEE 802.3u – 100TX with auto-negotiation  
» IEEE 802.3ab – 1000T Gigabit Ethernet  
» 100FX SFP support  
AT-8100S/16F8-SC  
AT-8100S/16F8-LC  
AT-8100S/24F-LC  
18.8Gbps  
18.8Gbps  
18.8Gbps  
27.9Mpps  
27.9Mpps  
27.9Mpps  
81µs  
11µs  
81µs  
81µs  
11µs  
11µs  
» 1000X SFP support  
Physical Specifications and MTBF Figures  
Safety and Electromagnetic Emissions  
Certifications  
PRODUCT  
WIDTH  
DEPTH  
HEIGHT  
WEIGHT  
MTBF (HOURS)  
» EMI: FCC class A, CISPR class A, EN55022 class  
A, C-TICK, VCCI Class A, CE, EN601000-3-2,  
EN601000-3-3  
AT-8100S/16F8-SC  
440 mm (17 in)  
441 mm (17.3 in)  
441 mm (17.3 in)  
441 mm (17.3 in)  
322 mm (12.7 in)  
4.1 kg (9.1 lb)  
4.4 kg (9.75 lb)  
4.4 kg (9.75 lb)  
190,000  
AT-8100S/16F8-LC  
AT-8100S/24F-LC  
440 mm (17 in)  
440 mm (17 in)  
322 mm (12.7 in)  
291 mm (11.5 in)  
170,000  
140,000  
» Immunity: EN55024  
» Safety: UL 60950-1 (cUlus), EN60950-1 (TUV),  
EN60825  
Power and Noise Characteristics  
RoHS Standards  
MAX POWER  
PRODUCT  
MAX HEAT  
CONSUMPTION DISSIPATION  
NOISE  
VOLTAGE  
FREQUENCY  
» Compliant with European and China RoHS standards  
AT-8100S/16F8-SC  
AT-8100S/16F8-LC  
AT-8100S/24F-LC  
22W*  
22W*  
22W*  
75 BTU/hr  
75 BTU/hr  
75 BTU/hr  
55.4 dB  
55.4 dB  
55.4 dB  
100-240V AC (10% auto-ranging)  
100-240V AC (10% auto-ranging)  
100-240V AC (10% auto-ranging)  
47-63Hz  
47-63Hz  
47-63Hz  
Package Description  
» AT-8100S/xx switch  
» AC power cords  
» Management cable (RJ-45 to DB-9)  
* Standard product with dual AC power supply  
Optical Ports Specifications  
» Rubber feet for desktop installation and 19” rack-  
mountable hardware kit accessories  
PRODUCT  
OPTICAL PORTS  
» Install guide and CLI users guide available at  
alliedtelesis.com  
AT-8100S/16F8-SC  
AT-8100S/16F8-LC  
AT-8100S/24F-LC  
100FX (MMF)  
100FX (MMF)  
100FX (MMF)  
» HDMI stacking cable (1 meter)  
NOT AVAILABLE IN THE UNITED STATES AND CANADA  
alliedtelesis.com  
 
8100S Fiber Series Switches | Layer 2–4 Fast Ethernet Stackable Switches  
Ordering Information  
8100S Series Fiber Switches  
AT-8100S/16F8-SC-xx  
Small Form Pluggable Optics Modules  
16 100M fiber SC ports, 8-port 10/100TX  
2 combo ports (10/100/1000T-100/1000 SFP)  
2 HDMI stacking ports  
AT-SPSX  
SFP, MMF, 1000Mbps, 220 / 500 m, 850 nm, LC  
Standard two AC power supplies  
AT-SPSX/1  
AT-8100S/16F8-LC-xx  
SFP, MMF, 1000Mbps, 220 / 550m, 850 nm, LC  
Extended temperature: -40ºC to 85ºC  
16 100M fiber LC ports, 8-port 10/100TX  
2 combo ports (10/100/1000T-100/1000 SFP)  
2 HDMI stacking ports  
AT-SPEX  
Standard two AC power supplies  
SFP, MMF, 1000Mbps, 2 km, 1310 nm, LC  
AT-8100S/24F-LC-xx  
24 100M fiber LC ports  
AT-SPLX10  
SFP, SMF, 1000Mbps, 10 km, 1310 nm, LC  
2 combo ports (10/100/1000T-100/1000 SFP)  
2 HDMI stacking ports  
Standard two AC power supplies  
AT-SPLX10/I  
SFP, SMF, 1000Mbps, 10 km, 1310 nm, LC  
Extended temperature: -40ºC to 85ºC  
AT-SPLX40  
SFP, SMF, 1000Mbps, 40 km, 1310 nm, LC  
Where xx =  
10 for US power cord  
20 for no power cord  
30 for UK power cord  
40 for Australian power cord  
50 for European power cord  
AT-SPZX80  
SFP, SMF, 1000Mbps, 80 km, 1550 nm, LC  
AT-SPBD10-13  
SFP, SMF, 1000Mbps, 10 km, 1310/1490 nm,  
LC-BiDi  
AT-SPBD10-14  
SFP, SMF, 1000Mbps, 10 km, 1490/1310 nm,  
LC-BiDi  
AT-SPFX/2  
SFP, MMF, 100Mbps, 2 km, 1310 nm, LC  
AT-SPFXBD-LC-13  
SFP, SMF, 100Mbps, 10 km, 1310/1510 nm, LC-BiDi  
AT-SPFXBD-LC-15  
SFP, SMF, 100Mbps, 10 km, 1510/1310 nm, LC-BiDi  
AT-SPFX/15  
SFP, SMF, 100Mbps, 15 km, 1310 nm, LC  
NOT AVAILABLE IN THE UNITED STATES AND CANADA  
North America Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895  
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830  
EMEA & CSA Operations | Incheonweg 7 | 1437 EK Rozenburg | The Netherlands | T: +31 20 7950020 | F: +31 20 7950021  
alliedtelesis.com  
© 2013 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.  
617-000403 Rev.C  
 

3Com Switch Hub 1000 SX User Manual
Aastra Telecom Telephone 9316CW User Manual
Abocom Network Card WUG2690 User Manual
AeroGarden Landscape Lighting 300417AA User Manual
Allied Telesis Network Router AR400 User Manual
Alpine Network Card PMD DOK2 User Manual
American DJ Power Supply DP 20A User Manual
Atlona Stereo Amplifier AT SAV18 User Manual
Audiovox Remote Starter 128 8114 User Manual
Bad Boy Mowers Lawn Mower 48031301 User Manual